B2B Marketing & AI Growth Insights- An Editorial Site in the MacRAE’S Publishing Network
corrugated box manufacturers
November 20, 2026

When investigating produce box failures in cold storage, review moisture exposure, stacked loads, pallet support, and box condition. Include pallet overhang, vent design, and stack alignment in the review, since each can affect corrugated stacking strength.

People Also Ask

Does Cold Storage Weaken Cardboard Boxes?

Assess moisture exposure and board suitability when reviewing box performance in cold storage.

What Is Box Compression Strength?

Box compression strength describes resistance to compression under specified test conditions.

Why Should Bottom Boxes Be Checked for Damage?

Include bottom boxes in inspections for crushing, bulging, and other signs of damage.

For growers, packers, and distributors, a collapsed stack can damage products and disrupt handling. It can crush product, block a cold room aisle, and force staff to restack pallets by hand. Recurring failures warrant a review of the packaging specification and handling conditions. The sections below outline what to inspect and discuss with the packaging supplier.

How Stacked Pallet Loads Carry Their Weight

Review how the stacking arrangement transfers weight through the boxes and onto the pallet. Boxes lower in the stack sit beneath the rest of the load and may stay there for the full storage period.

Experienced corrugated box manufacturers can assess wall support and corner alignment under the proposed stacked load. 

Have the supplier assess the stacking pattern for box support and pallet stability. No single stacking pattern suits every load, so the choice depends on the product, the pallet, and the handling route.

Include storage duration in the assessment of box performance under sustained loads. Recording storage time alongside stack height lets the supplier assess both together.

What Cold Storage Moisture Does to Corrugated

Corrugated board is made from paper fibres, and those fibres can absorb moisture from the surrounding air. Record actual cold room humidity and any observed moisture exposure.

Document damp board, bulging walls, or leaning stacks, and investigate the contributing conditions.

Check for condensation during transfers between storage and loading areas. Share any observed wetting with the packaging supplier.

Empty boxes stored before packing deserve the same attention. Note where they are kept and whether that area stays dry.

What to Check When Boxes Overhang the Pallet

Pallet overhang occurs when boxes extend past the edge of the pallet deck. The overhanging walls and corners lose direct support from below. Ask the supplier to assess box support where cases extend beyond the pallet deck.

Exposed corners can also catch on forklifts, racking, and neighbouring pallets.

Check box dimensions and placement against the pallet footprint. Where overhang appears regularly, the box size or pallet pattern may need review.

How Ventilation Holes Affect Box Strength

Ventilation holes help cold air move through the stack. Each hole also removes board from the box wall, so vent design belongs in any structural review.

The review should cover:

  • Vent placement, confirmed against the proposed box design, load, and cooling requirements
  • Vent dimensions and hand holes, included in the structural assessment
  • Vent alignment, reviewed against the intended airflow arrangement

Airflow and structure should be designed together.

How to Reduce Box Failures in Storage

Investigate the packaging specification alongside storage conditions, pallet support, and handling practices. A useful review looks at the box, the stack, and the cold room together.

Condition to Review Signs to Check Supplier Review
Cold room humidity Damp board or bulging walls Board grade for recorded humidity and storage time
Sustained stacked load Crushed or bulging lower boxes Stack height and storage period
Stacking pattern Leaning or shifting loads Box support and pallet stability
Pallet overhang Cases extending past the deck Box dimensions against the pallet footprint
Vent and hand hole design Damage around openings Vent size, position, and alignment

Practical steps include:

  • Share actual stack heights, storage times, and humidity records with the packaging supplier.
  • Plan box placement within the pallet footprint.
  • Ask whether edge board protection suits the pallet arrangement and storage conditions.
  • Record crushed boxes or leaning loads and investigate associated packaging and handling concerns. Reviewing the signs that packaging is increasing damage costs can help frame that investigation.

Review board grade alongside stacking pattern, pallet support, vent design, and storage conditions. Include product fit and storage conditions in the review, using the linked guide to right sized packaging for Canadian businesses.

Coleman Containers designs and manufactures custom corrugated packaging in house in Etobicoke, Ontario. Its range includes vented produce packaging boxes and edge protection for palletized loads. Review recurring damage before the next packing season to inform packaging and handling decisions. Contact Coleman Containers to review how current produce boxes perform in storage and whether the specification suits cold room conditions.

Frequently Asked Questions About Produce Box Strength

What Is Corrugated Stacking Strength?

Corrugated stacking strength is a box’s ability to support the weight stacked above it under actual storage and handling conditions.

Is Box Compression Strength the Same as Stacking Strength?

Not exactly. Ask the supplier how compression test results relate to the intended storage and stacking conditions.

How Much Pallet Overhang Is Acceptable?

Plan box placement within the pallet footprint and confirm support requirements with the supplier.

Do Vented Produce Boxes Collapse More Easily?

Vent position alone does not establish suitability. Have the complete box design assessed for the application.

Can a Stronger Board Grade Solve Every Cold Storage Failure?

No. Stacking pattern, pallet support, vent design, and storage conditions also need review alongside board grade.